Wi-Fi Antennas On the Cheap [802.11 Wireless]

It should be noted right off that I intend to research information regarding unconventional wireless networking use. You probably won’t find much here that’ll help with day-to-day wireless networking. Unless, of course, you’re desperate and don’t care that your setup looks ridiculous.

Probably one of the most popular things I’ve run across when looking into wi-Fi antennas is what’s called “WOKTENNA” or “WIFRY.” Admittedly, these names aren’t used as often as the concepts that are derived from them, but I think the names are funny, and you should too.

The idea is to use any metallic parabolic device (think about what you have in your kitchen right now that fits this bill) and to place a wireless USB adapter at the focal point of the selected parabola. Its been found that Asian cookware, like various types of WOK cookware work very well for this purpose. Here is a site that shows a number of examples when people combine USB WiFi adapoters with DIY antennas to make a “poor man’s wifi,” including several variations of the WOKTENNA idea.

Another cheap option is the parabolic reflector antenna. The one I used is called the Windsurfer; a template is available at freeantennas.com. The site claims that a 1:1 scale of the template will net you about 9dbi of gain, double the size and you’ll see 12dbi of gain.

But, how do the cheapies compare to the “proper” devices available for increasing gain?

Using a stock Fonera (from FON) version 1 wireless access point with DD-WRT firmware I attached various antennas and performed simple signal trials using a laptop and Netstumler. Below, you can see a screencap of Netstumbler’s output. The first section on the left was just some testing before running the trials. The stock Fonera antenna provides a mere 1.5dbi of gain, and at approximately 111 meters, gets a signal to noice ratio of -70 to -60 dBm. A large 5dbi omni-directional antenna attached to the Fonera provides a solid -60dBm rating at 111 meters. The same antenna with a Windsurfer parabolic reflector provides slightly more gain. Using a 10dbi directional panel antenna — the “proper” way to direct wireless signals — performs equally with the 5dbi omni-antenna with the Windsurfer attatched.

WiFi Signal Stregnths of various antenna methods. (Click to view full image)

Approx. range of trials. (Click to view larger) Tests were performed at ground level, folliage was not an issue.

The most surprising result, however, is the result seen with the stock 1.5dbi Fonera antenna and the Windsurfer parabolic reflector. As Netstumbler reports it, this arrangement provides just as much gain, even a pinch more, than all previous antenna combinations, including the 10dbi directional panel and the much larger 5dbi omni-directional antenna!

So, if you’re trying to get a signal outdoors or to the other side of your home, try throwing a parabolic reflector antenna on your current setup before laying down any cash on inferior solutions!

Coming soon… additional tests with the same antennas at a larger distance, new antennas, and a dual-antenna setup (Linksys WRT-style).

Tether the T-Mobile G1 without any Messy Rooting or Hacking

Tethering has been around for the G1 since it hit the market, but it always required gaining root access to the OS by loading hacked-up version of the firmware. From what I’ve read, the process is fairly painless, and there are few reports of bricking. But, once you’ve rooted your phone, you’d have to load up the software and make changes to SOCKS proxy settings in your browser to connect through the phone.

I’ve been very interested in the idea of using my phone as a modem in a pinch, but I never liked the idea of rooting my phone and dealing with the manual updating and vices that come with it (I’m not a developer, so there’s not a huge benefit). However, there’s a new freeware app, PdaNet,  that sets up your USB-connected G1 as a tethered modem using the WiFi or cellular connection on the phone. PdaNet has already done the job for BlackBerry, Palm OS, Windows Mobile, iPhone, and now, it’s been ported to Android (for G1 only, for now).

The Android version of PdaNet is considered a “preview release” right now. It only allows for connection through the USB, while, for example, the iPhone version can be set up to join a wireless ad-hoc network and others connect via Bluetooth. Though, if you know what you’re doing, you could set up the computer that’s connected to the G1 to share the Internet connection across to the WiFi connection in the computer which is joined to an ad-hoc, effectively using the computer as a router and wireless access point of sorts, with the G1 as a modem.

I was very skeptical of the software; very skeptical that it wouldn’t work as advertised. But, sure enough, it installed without a hitch and the connection was made without a fuss from neither phone nor laptop. There’s even a 64-bit version, but I haven’t tried that one yet.

Just be careful not to violate any terms of service you may have, or go over T-Mobile’s “unlimited” 5GB cap! Word on the street is, though, that T-Mobile will not block tethering, and the 5GB cap is a “soft” cap, meaning, once you hit the cap, they’ll throttle your speed down below edge speeds.  Of course, none of this counts if you’re connected via WiFi, but in that case, why are you tethering??

(via GAB, and Android Community)